It does not sound like we have a choice according to Bill’s email. I would proceed unless Bill has a better alternative. Slade Strickland Director of Parks and Recreation Town of Addison P.O. Box 9010 Addison, Texas 75001-9010 Direct Office - 972.450.2869 Cell - 972.489.4426 P Please consider the environment before printing this email. -----Original Message----- From: Rodney Louviere [mailto:rlouviere@daa-civil.com] Sent: Wednesday, August 19, 2009 3:11 PM To: Slade Strickland Cc: Clay Barnett Subject: FW: 2009 federal mandate for pulse start metal halide An thoughts to the 150 w light? From: Rodney Louviere Sent: Tuesday, August 18, 2009 3:32 PM To: 'Slade Strickland' Cc: 'Clay Barnett' Subject: RE: 2009 federal mandate for pulse start metal halide I am ok, but I will not own the lights. Town will at some point in time, when final acceptance is granted. In about 6 years for total build out. So I need to know if I purchase the 150 w lights will Town be ok with. I am about to pay $84,000 dollars for lights. From: Slade Strickland [mailto:sstrickland@addisontx.gov] Sent: Tuesday, August 18, 2009 3:15 PM To: Rodney Louviere Cc: Clay Barnett Subject: RE: 2009 federal mandate for pulse start metal halide Is Bill’s response ok with you? Slade Strickland Director of Parks and Recreation Town of Addison P.O. Box 9010 Addison, Texas 75001-9010 Direct Office - 972.450.2869 Cell - 972.489.4426 P Please consider the environment before printing this email. -----Original Message----- From: Rodney Louviere [mailto:rlouviere@daa-civil.com] Sent: Tuesday, August 18, 2009 1:49 PM To: Slade Strickland Cc: Clay Barnett Subject: FW: 2009 federal mandate for pulse start metal halide Gentlemen, Our project calls for 175w, but I was notified about this? What should I do for Meridian Square? I have attached what was sent to me by my light supplier from Bega. From: Bill Galvin [mailto:Bgalvin@ALA-INC.NET] Sent: Tuesday, August 18, 2009 12:58 PM To: Rodney Louviere Subject: 2009 federal mandate for pulse start metal halide Rodney, As of January 2009 all metal halide lamps 150 watt and higher must be pulse start and the 175 Metal Halide does not comply so all manufacturer’s are replacing it with the 150ED17 pulse start lamp as submitted with the Bega fixtures. Thanks, Bill bill galvin architectural lighting associates 101 turtle creek boulevard dallas, texas 75207 214.658.9000 p 214.658.9002 f www.ala-inc.net ******************************************************************************************************************* This e-mail and any files or attachments transmitted with it contains Information that is confidential and privileged. This document may contain Protected Health Information (PHI) or other information that is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further disclosures are prohibited without proper authorization. If you are not the intended recipient, any disclosure, copying, printing, or use of this information is strictly prohibited and possibly a violation of federal or state law and regulations. If you have received this information in error, please delete it and notify Hamid Khaleghipour at 972-450-2868 immediately. Thank you. *******************************************************************************************************************