Nancy: Please see correspondence below concerning some of the rebar that was put in this weekend. I will let you know as soon as Matt responds. I would recommend that they not pour until this question is resolved. Thanks, Ron King, P.E. Associate, Denton Office Manager Freese and Nichols, Inc 2220 San Jacinto Blvd, Suite 330 Denton, Texas 76205 940-220-4350 Office rgk@freese.com www.freese.com From: Ron King Sent: Monday, April 18, 2011 12:11 PM To: Wiatrek, Matt (mwiatrek@teamlandmark.com) Cc: burnie@dunhamengineering.com; Ron King Subject: RE: Matt: FYI, here is a picture of the area of spacing concern. Ron King, P.E. Associate, Denton Office Manager Freese and Nichols, Inc 2220 San Jacinto Blvd, Suite 330 Denton, Texas 76205 940-220-4350 Office rgk@freese.com www.freese.com From: Ron King Sent: Monday, April 18, 2011 12:10 PM To: Wiatrek, Matt (mwiatrek@teamlandmark.com) Cc: Ron King; burnie@dunhamengineering.com Subject: Matt: During inspections of the pier cap rebar this weekend, we noticed that between Piers 3 and 4 that the F601 spacing was 36” center to center instead of the 24” center to center spacing indicated in your Drawing Sheet S4-D2. We also noticed that F601 was put in where the man-door opening is to go, but your shop drawing says not to put it there. It could be that the one that was put in the man-door location should have gone outside of it, and you would have had the correct 24” spacing between Piers 3 and 4. We expressed this concern to Ron Mathis, but did not get a clear indication from him as to what is going to be done. Please take a look into this and provide confirmation of the shop drawing intent, and what is needed to be done to correct the spacing issue. This definitely needs to be resolved before the pier cap is poured. Thanks, Ron King, P.E. Associate, Denton Office Manager Freese and Nichols, Inc 2220 San Jacinto Blvd, Suite 330 Denton, Texas 76205 940-220-4350 Office rgk@freese.com www.freese.com Please consider the environment before printing this message. ________________________________ This electronic mail message is intended exclusively for the individual or entity to which it is addressed. This message, together with any attachment, may contain the sender's organization's confidential and privileged information. The recipient is hereby notified to treat the information as confidential and privileged and to not disclose or use the information except as authorized by sender's organization. Any unauthorized review, printing, retention, copying, disclosure, distribution, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this message in error, please immediately contact the sender by reply email and delete all copies of the material from any computer. Thank you for your cooperation.