Clay:
In looking at the ductile iron pipe and fittings spec 15062, I only found the domestic manufacturer requirement for grooved joint pipe and fittings, but not for MJ joint fittings, unless
there is something in the Special Provisions that I missed.
The only comment I have on the MJ fittings is that the spec calls for the exterior to be coated with 1 mil bituminous per AWWA C151 or C110, whereas they propose to use a seal coat of
AWWA C104 asphaltic.
On the ductile iron restraint gland, they are required to be equal with EBAA Megalug. I have attached EBAA’s sample spec, and Stargrip appears to meet it with the exceptions that Stargrip
does not indicate that they are listed with UL, and need to know what material they coat it with.
I have also attached EBAA’s sample spec on the PVC restraint gland. Stargrip also appears to meet that one, except need to know what material they coat it with.
Thanks,
Ron King, P.E.
Associate, Denton Office Manager
Freese and Nichols, Inc
2220 San Jacinto Blvd, Suite 330
Denton, Texas 76205
940-220-4350 Office
rgk@freese.com
www.freese.com
From: Clay Barnett [mailto:cbarnett@addisontx.gov]
Sent: Tuesday, February 08, 2011 3:46 PM
To: Ron King
Cc: Nancy Cline; Jerry Davis; David Wilde
Subject: FW: Addison Elevated Tank - SPP Approval
Ron,
Please review the attached information and let me know your thoughts.
I know that they have been selling a product imported from China for many years, but they state that they now produce the product in the United States. I asked if the ore was domestically
refined and he dodged my question, but they do have a letter stating that they meet the requirements for ARRA funds.
Please let me know your thoughts.
Thanks,
Clay Barnett, P.E.
Town Engineer
Town of Addison
16801 Westgrove Drive
Addison, TX 75001-2818
Office: (972) 450-2857
From: Blake Wegener [mailto:blakew@starpipeproducts.com]
Sent: Tuesday, February 08, 2011 3:26 PM
To: Clay Barnett
Cc: Blake Wegener
Subject: Addison Elevated Tank - SPP Approval
Mr. Barnett –
Hello, my name is Blake Wegener and I am a representative of Star Pipe Products. Star Pipe is a manufacturer of ductile iron fittings, mechanical joint restraints, grooved couplings,
and municipal castings. I am requesting the approval of Star Pipe Products ductile iron fittings and joint restraints. Specifically for the Surveyor 1.5MG Elevated Storage Tank in Addison,
TX bidding on February 11th, 2011. The specifications set forth state the following:
3" through 12" fittings for use with PVC C-900 piping shall be cast iron conforming to AWWA C-110. Joint restraint devices shall be Mega-lug or approved equal.
Fittings fro use with Ductile Iron piping shall be ASTM A-536 ductile iron or ASTM A-48 cast iron in accordance with AWWA C-110 or AWWA C-153.
Restrained joints shall be mechanically interlocking joints. Restraints joints shall be US Pipe “TR Flex”, ACIPCO “Flex Ring”, or Clow “Super-Lock” Restrained fittings using set screws,
restraining gaskets, gripper type glands, and field-cuts of restrained joints shall be Mega-Lug, or approved equal.
Based on these specifications, Star Pipe Prodcuts’ material is considered to meet the “or equal” status. I am requestiing the approval in writing or an adendum. I have attatched submital
information for your review. If you have any questions or if there is any other information you need please let me know. I appreciate your time and consideration.
Blake
<> <> <> <> <>
Blake Wegener
Territory Manager
Star Pipe Products
C: 214-735-9657
O: 800-999-3009
blakew@starpipeproducts.com
STAR PIPE NOW PRODUCES DOMESTIC MATERIAL!
Please consider the environment before printing this message.
________________________________
This electronic mail message is intended exclusively for the individual or entity to which it is addressed. This message, together with any attachment, may contain the sender's organization's
confidential and privileged information. The recipient is hereby notified to treat the information as confidential and privileged and to not disclose or use the information except as
authorized by sender's organization. Any unauthorized review, printing, retention, copying, disclosure, distribution, retransmission, dissemination or other use of, or taking of any
action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this message in error, please immediately contact the
sender by reply email and delete all copies of the material from any computer. Thank you for your cooperation.