Here are some plans for various intersections on Belt Line.  The One labeled TEMP004 is the cover for the TxDOT intersection widening at Midway and Quorum, but there are 116 pages in
that set, and I didn’t think I could email that many.

 

David E. Wilde

Town of Addison

Public Works Inspector

972-450-2847

dwilde@addisontx.gov

 

From: Jason Shroyer [mailto:jshroyer@rhsitx.com] 
Sent: Monday, July 11, 2011 6:55 AM
To: David Wilde
Subject: Addison - Belt Line - Design Drawings

 

Mr. Wilde,

 

I received a phone call from Tom Kramer over at HNTB concerning the Belt Line project on Friday.  We are having a small dilemma that I hope you can help with.  Apparently the drawings
that HNTB used to do the design for the Median Improvements to Belt Line Road project were from the early to mid 80’s.  It is apparent after going out there on Thursday and field measuring
a few of the medians, in particular the ones closest to the Tollway, that there has been some changes since.  The widths or the  medians are off quite a bit, which makes us believe that
there should be a set of drawings for the medians that is more accurate.  Is it possible that there was some changes made to the medians on Belt Line Road sometime in the mid to late
90’s, and if so would we be able to access those drawings?  I really appreciate any help with this matter.  Please contact me if you have any questions.

 

Thank you,

 

Jason Shroyer, EIT, AM ASCE

Resident Project Representative

RHSI

(210) 288-5349 (cell)

(469) 718-5528 (office)

jshroyer@rhsitx.com