Dave, Could you pull plans on the lines shown on this sheet? This is for the project on Lindbergh that was sent earlier, but this better defines the items needed. Thanks, Clay Barnett, P.E. Town Engineer Town of Addison 16801 Westgrove Drive Addison, TX 75001-2818 Office: (972) 450-2857 From: Ryan Plasse [mailto:rplasse@pkce.com] Sent: Friday, June 24, 2011 11:49 AM To: Clay Barnett Cc: Hong Chen; Ben Smith Subject: RE: Revised Bankston Meeting Minutes Clay, Per our phone conversation, attached is a pdf showing the Airport drainage system we need for our analysis (Line P1 and P2 on the SWMM Work Map.pdf). Also, we will not need the Arapaho stormsewer system plans if the City is ok with our sensitivity analysis. Basically the analysis show the starting HGL would need to be 4.05' above the top of Midway Road before it would affect our site. I've attached the section from our report regarding the Sensitivity Analysis. We obtained a copy of Mr. Nave's files. However, there were not as-built plans in his files for the needed stormsewer systems. As we discussed, we will be submitting the Drainage report on Monday or Tuesday. Please continue to move forward with our data requests and we will incorporate any new information with the next round of comments as required. Please let me know if you have any questions or would like to discuss further. Thanks for your help! Regards, Ryan ________________________________ From: Clay Barnett [mailto:cbarnett@addisontx.gov] Sent: Friday, June 24, 2011 10:59 AM To: Ryan Plasse Cc: Hong Chen; Ryan P. Mortensen; Nancy Cline; Skipwith, Walter Subject: RE: Revised Bankston Meeting Minutes Ryan, I am working on getting the amount of impervious cover required for an EMAS system. I will forward that as soon as it is available. Our Public Works Inspector is working on compiling the record drawings you requested. Since we do not have a GIS system, they must be compiled by hand, which is extremely labor intensive. Alternatively, these were give to Shannon Nave. Would it be possible to get them from them? We could then just supplement with the plans for Midway and Arapaho. I will respond to the previous email regarding the sensitivity analysis. If you have any additional questions, please let me know. Thanks, Clay Barnett, P.E. Town Engineer Town of Addison 16801 Westgrove Drive Addison, TX 75001-2818 Office: (972) 450-2857 From: Ryan Plasse [mailto:rplasse@pkce.com] Sent: Monday, June 20, 2011 8:03 AM To: Nancy Cline; Skipwith, Walter; Clay Barnett Cc: Hong Chen; Ryan P. Mortensen; Ryan Plasse Subject: Revised Bankston Meeting Minutes All... Attached is the meeting minutes updated per comments. Also I'd like to follow up on our request for information regarding action items 1 through 3 of the meeting minutes. We need the impervious area Nancy mentioned and the as-built plans for the southern airport drainage system crossing Lindbergh Drive. We also need the as-built plans for Arapaho if our preliminary sensitivity analysis is not acceptable to the City (the sensitivity analysis, if accepted, would be fully documented in the report). Please let me know if you have any questions or would like to discuss further. Regards, D. Ryan Plasse, P.E., CFM Director of Water Resources 8350 N. Central Expwy, Suite 1000 Dallas, Texas 75206 -1612 P: 972.235.3031 | F: 972.235.9544 ************************************************************ This e-mail and any files or attachments transmitted with it contain Information that is confidential and privileged. This document may contain Protected Health Information (PHI) or other information that is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further disclosures are prohibited without proper authorization. If you are not the intended recipient, any disclosure, copying, printing, or use of this information is strictly prohibited and possibly a violation of federal or state law and regulations. If you have received this information in error, please delete it and notify Hamid Khaleghipour at 972-450-2868 immediately. Thank you. ************************************************************