Mike, I ran the trench drain past Garver. They thought it would be fine. Please proceed as we discussed earlier. Thanks, Clay Barnett, P.E. Town Engineer Town of Addison 16801 Westgrove Drive Addison, TX 75001-2818 Office: (972) 450-2857 From: Mike Brosler [mailto:mbrosler@planesmart.com] Sent: Friday, April 23, 2010 5:39 PM To: Clay Barnett Cc: Mcanally, Joe Subject: FW: Still awaiting Grate Approval Hi Clay, MSF said they were waiting for a response from Garver Engineering before doing the drainage repairs around the T-Hangars. Please let me know if there is anything else us. Thanks. Michael A. Brosler President & CEO 15841 Addison Road Addison, Texas 75001 972-380-8004 or 888-2-AVIATE www.planesmart.com From: Richard French [mailto:rfrench@msfpartners.com] Sent: Friday, April 23, 2010 5:26 PM To: Mike Brosler Cc: Russ Stanley; Ron Dailey Subject: Still awaiting Grate Approval Hi Mike, As of late this afternoon, we have not yet been notified if the Town of Addison is accepting the grate we submitted. Ron Dailey called Clay Barnett at 4:30 PM today to see if they have gotten any response from Garver Engineering. Clay was not in his office so Ron left a voice mail message. Please let us know if and when the Town of Addison notifies you on their decision on the grate. We are anxious to complete this project ASAP. We did have the plumber drop by and check the wash basin. He found a piece of plastic had been placed under the grate. (Not sure why or by who.) He removed the plastic and the drain is running clear. Look forward to hearing soon on the Town’s decision. Best regards, Richard Richard French | MSF Partners®, Inc. | President | Two Legacy Town Center | 6900 N. Dallas Parkway, Suite 770| Plano, TX 75024 | rfrench@msfpartners.com | O 972.403.0909 | F 972-403.9292 This message, including any attachments, is confidential and/or proprietary to MSF Partners® Inc. and its affiliated companies and should be read or retained only by the intended recipient. If you have received it in error, please notify the sender immediately and delete the original message.