Tom,

 

Attached are the specifics for the radios.  They are approximately 12”Hx4”Wx4”D from what Brandon described.  He does not believe they will be visible from the street below and offered
to give you a demonstration at the next Vitruvian meeting.  If you are interested, please let me know and I will arrange for him to be present.

 

Thanks,

Clay Barnett, P.E.

Town Engineer

Town of Addison

16801 Westgrove Drive

Addison, TX 75001-2818

Office: (972) 450-2857

 <http://www.addisongreen.info/> 

 

From: Brandon Graham 
Sent: Friday, May 13, 2011 8:53 AM
To: Clay Barnett
Subject: RE: Traffic signal antenna

 

Here is the data sheet for the radios. There will need to be 2 of them on top of the building and a small enclosure for the power for the radios. What needs to be provided on the top
of the building is a 120 volt circuit that would be utilized for the radios only. And that circuit would need to be located at the closest corner of the building nearest the intersection.

 



 



Town of Addison

Traffic Signal Tech.

Office: 972-450-2852

Cell: 469-426-9840

Fax: 972-450-2837

Email: bgraham@addisontx.gov

 

 

From: Clay Barnett 
Sent: Friday, May 13, 2011 8:41 AM
To: Brandon Graham
Subject: FW: Traffic signal antenna

 

Brandon,

 

Could you get the specifics listed below about the repeater to be placed on Savoye?

 

Thanks,

Clay Barnett, P.E.

Town Engineer

Town of Addison

16801 Westgrove Drive

Addison, TX 75001-2818

Office: (972) 450-2857

 <http://www.addisongreen.info/> 

 

From: Tom Lamberth [mailto:TLamberth@udr.com] 
Sent: Thursday, May 12, 2011 5:30 PM
To: Clay Barnett; John Hill
Cc: Lea Dunn; Hoffman, Leonard
Subject: Traffic signal antenna

 

Clay or John- Believe it or not, I am working on this. One thing I don't know is what the antenna looks like. Is there a picture or set of dimensions available that we could review?
Sorry I have been slow on this but we will get it done. Thanks. 

 

Tom Lamberth

UDR

972 716 3560 (O)

214 662 1088 (C)