Bruce,

 

Has this change been made?

 

Thanks,

Clay Barnett, P.E.

Town Engineer

Town of Addison

16801 Westgrove Drive

Addison, TX 75001-2818

Office: (972) 450-2857

 <http://www.addisongreen.info/> 

 

-----Original Message-----
From: Clay Barnett 
Sent: Monday, December 28, 2009 3:30 PM
To: Joel Massey (jmassey@icon-engineers.com)
Cc: Bruce Dunne (bdunne@icon-engineers.com)
Subject: FW: Vitruvian Park - Small Sign Mounting (Park & Regulatory)

 

Joel,

 

Please see Robin’s response below.

 

Thanks,

Clay Barnett, P.E.

Town Engineer

Town of Addison

16801 Westgrove Drive

Addison, TX 75001-2818

Office: (972) 450-2857

 <http://www.addisongreen.info/> 

 

-----Original Message-----
From: Robin Jones 
Sent: Monday, November 30, 2009 1:05 PM
To: Clay Barnett
Cc: Brandon Graham; Charles Mitchell; Nancy Cline
Subject: RE: Vitruvian Park - Small Sign Mounting (Park & Regulatory)

 

I spoke with Mitch and Brandon and we would prefer to stay with our standard pole and base.

 

 

-----Original Message-----
From: Clay Barnett 
Sent: Monday, November 30, 2009 12:05 PM
To: Robin Jones
Cc: Brandon Graham; Charles Mitchell; Nancy Cline
Subject: FW: Vitruvian Park - Small Sign Mounting (Park & Regulatory)

 

Robin,

 

The design team for Vitruvian Park would like to use a special pole.  Please have a look at it and let me know if you have any comments.

 

Thanks,

Clay Barnett, P.E.

Town Engineer

Town of Addison

16801 Westgrove Drive

Addison, TX 75001-2818

Office: (972) 450-2857

P Please consider the environment before printing this email.

 

-----Original Message-----
From: Joel Massey [mailto:jmassey@icon-engineers.com] 
Sent: Tuesday, November 03, 2009 12:18 PM
To: Clay Barnett
Cc: Bruce Dunne
Subject: Vitruvian Park - Small Sign Mounting (Park & Regulatory)

 

Clay,

 

Per our meeting last Thursday at the Town, this email is to address the small signage system, regulatory and non-regulatory, for the Vitruvian Park development.

 

As you are aware, the Vitruvian Park signage design, presented to and approved by the Town, will utilize round posts (in a brown color consistent with the Vitruvian Park branding), a
decorative base escutcheon and various standard & decorative sign mounting brackets.  All regulatory signs will be standard signs mounted to the special mountings.  The posts are available
in a standard power coated steel color, “national park brown”, which has been verified as an acceptable match to the intended development color.  The proposed small sign mounting standards,
for the Park, differ from the direction that you had previously indicated to us for regulatory signs along Vitruvian Way.  We would like to pursue a small sign mounting system that would
satisfy both regulatory and non-regulatory conditions in the entire development.  Our previous direction was to use a DOT, FHWA approved slip-base breakaway system for regulatory signs
along Vitruvian Way.  This system requires the use of very large 2.875” diameter sign posts as well as the very large mounting base typically seen on highways.  We would like to use
a socket and wedge system with 2.375” diameter sign posts to be consistent with the Park signage.  This system is also a DOT, FHWA approved system and we have suggestions to prevent
the constructability issues you said you had at Addison Circle with the system set in concrete.  Attached is information of the preferred small sign mounting standards and posts we would
like to use for both Regulatory and Non-Regulatory signs.

 

Please review the information and let us know if this system will be acceptable for all Vitruvian Park development signage.

 

Joel A. Massey

Project Manager

icon Consulting Engineers, Inc.

Bicentennial Financial Center

250 W. Southlake Blvd., Suite 117

Southlake, Texas  76092

Phone: (817) 552-6210

Fax: (817) 552-3126

Mobile: (817) 229-7944

jmassey@icon-engineers.com