FYI This morning Wade contacted me that the fire hydrant on Ponte was hit.  When I went over there I observed the there was indication that the hydrant was pushed SE approximately 4-6
inches, then pushed back (there was a gap on the SE side of the hydrant), and there was a scrape on the 4 inch nozzle cap.  I was going to turn on the hydrant valve to check for leaks,
but the valves were covered by a pile of scaffolding boards and pipes.  When the scaffolding was removed I observed that the valve stack on the 10 inch valve was broken and pushed over,
and the hydrant valve stack was also pushed over and the stacks were  filled with dirt and mud.  Hence, I was unable to test the hydrant for leaks at this time.  Wade took pictures and
contacted Chuy with Andres to let him know.

 

David E. Wilde

Town of Addison

Public Works Inspector

972-450-2847

dwilde@addisontx.gov