Well, I thought Kevin Sloan Studio, LRK and UDR should know what is being proposed.  Don’t you?

 

________________________________

From: Clay Barnett [mailto:cbarnett@addisontx.gov] 
Sent: Tuesday, April 13, 2010 3:31 PM
To: Bruce Dunne
Subject: RE: Vitruvian Park - Small Sign Mounting (Park & Regulatory)

 

Bruce,

 

Attached is the standard detail.  Who is the ‘”design team?”

 

Thanks,

Clay Barnett, P.E.

Town Engineer

Town of Addison

16801 Westgrove Drive

Addison, TX 75001-2818

Office: (972) 450-2857

 <http://www.addisongreen.info/> 

 

-----Original Message-----
From: Bruce Dunne [mailto:bdunne@icon-engineers.com] 
Sent: Tuesday, April 13, 2010 3:20 PM
To: Clay Barnett
Subject: RE: Vitruvian Park - Small Sign Mounting (Park & Regulatory)

 

Send me what the Town wants and I will run it past the design team.

 

________________________________

From: Clay Barnett [mailto:cbarnett@addisontx.gov] 
Sent: Tuesday, April 13, 2010 3:13 PM
To: Bruce Dunne
Subject: FW: Vitruvian Park - Small Sign Mounting (Park & Regulatory)

 

Bruce,

 

Has this change been made?

 

Thanks,

Clay Barnett, P.E.

Town Engineer

Town of Addison

16801 Westgrove Drive

Addison, TX 75001-2818

Office: (972) 450-2857

 <http://www.addisongreen.info/> 

 

-----Original Message-----
From: Clay Barnett 
Sent: Monday, December 28, 2009 3:30 PM
To: Joel Massey (jmassey@icon-engineers.com)
Cc: Bruce Dunne (bdunne@icon-engineers.com)
Subject: FW: Vitruvian Park - Small Sign Mounting (Park & Regulatory)

 

Joel,

 

Please see Robin’s response below.

 

Thanks,

Clay Barnett, P.E.

Town Engineer

Town of Addison

16801 Westgrove Drive

Addison, TX 75001-2818

Office: (972) 450-2857

 <http://www.addisongreen.info/> 

 

-----Original Message-----
From: Robin Jones 
Sent: Monday, November 30, 2009 1:05 PM
To: Clay Barnett
Cc: Brandon Graham; Charles Mitchell; Nancy Cline
Subject: RE: Vitruvian Park - Small Sign Mounting (Park & Regulatory)

 

I spoke with Mitch and Brandon and we would prefer to stay with our standard pole and base.

 

 

-----Original Message-----
From: Clay Barnett 
Sent: Monday, November 30, 2009 12:05 PM
To: Robin Jones
Cc: Brandon Graham; Charles Mitchell; Nancy Cline
Subject: FW: Vitruvian Park - Small Sign Mounting (Park & Regulatory)

 

Robin,

 

The design team for Vitruvian Park would like to use a special pole.  Please have a look at it and let me know if you have any comments.

 

Thanks,

Clay Barnett, P.E.

Town Engineer

Town of Addison

16801 Westgrove Drive

Addison, TX 75001-2818

Office: (972) 450-2857

P Please consider the environment before printing this email.

 

-----Original Message-----
From: Joel Massey [mailto:jmassey@icon-engineers.com] 
Sent: Tuesday, November 03, 2009 12:18 PM
To: Clay Barnett
Cc: Bruce Dunne
Subject: Vitruvian Park - Small Sign Mounting (Park & Regulatory)

 

Clay,

 

Per our meeting last Thursday at the Town, this email is to address the small signage system, regulatory and non-regulatory, for the Vitruvian Park development.

 

As you are aware, the Vitruvian Park signage design, presented to and approved by the Town, will utilize round posts (in a brown color consistent with the Vitruvian Park branding), a
decorative base escutcheon and various standard & decorative sign mounting brackets.  All regulatory signs will be standard signs mounted to the special mountings.  The posts are available
in a standard power coated steel color, “national park brown”, which has been verified as an acceptable match to the intended development color.  The proposed small sign mounting standards,
for the Park, differ from the direction that you had previously indicated to us for regulatory signs along Vitruvian Way.  We would like to pursue a small sign mounting system that would
satisfy both regulatory and non-regulatory conditions in the entire development.  Our previous direction was to use a DOT, FHWA approved slip-base breakaway system for regulatory signs
along Vitruvian Way.  This system requires the use of very large 2.875” diameter sign posts as well as the very large mounting base typically seen on highways.  We would like to use
a socket and wedge system with 2.375” diameter sign posts to be consistent with the Park signage.  This system is also a DOT, FHWA approved system and we have suggestions to prevent
the constructability issues you said you had at Addison Circle with the system set in concrete.  Attached is information of the preferred small sign mounting standards and posts we would
like to use for both Regulatory and Non-Regulatory signs.

 

Please review the information and let us know if this system will be acceptable for all Vitruvian Park development signage.

 

Joel A. Massey

Project Manager

icon Consulting Engineers, Inc.

Bicentennial Financial Center

250 W. Southlake Blvd., Suite 117

Southlake, Texas  76092

Phone: (817) 552-6210

Fax: (817) 552-3126

Mobile: (817) 229-7944

jmassey@icon-engineers.com

 

 

******************************************************************************************************************









This e-mail and any files or attachments transmitted with it contains Information that is confidential and privileged. This document may contain Protected Health Information (PHI) or
other information that is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further disclosures are prohibited
without proper authorization. If you are not the intended recipient, any disclosure, copying, printing, or use of this information is strictly prohibited and possibly a violation of
federal or state law and regulations. If you have received this information in error, please delete it and notify Hamid Khaleghipour at 972-450-2868 immediately. Thank you.



















*******************************************************************************************************************
******************************************************************************************************************

This e-mail and any files or attachments transmitted with it contains Information that is confidential and privileged. This document may contain Protected Health Information (PHI) or
other information that is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further disclosures are prohibited
without proper authorization. If you are not the intended recipient, any disclosure, copying, printing, or use of this information is strictly prohibited and possibly a violation of
federal or state law and regulations. If you have received this information in error, please delete it and notify Hamid Khaleghipour at 972-450-2868 immediately. Thank you.



*******************************************************************************************************************