Wanted you to see this to make sure we are on the same page. I am going to send this to Andres and direct them to redo the mock up. From: Robyn Jacobson [mailto:rdj@kevinsloanstudio.com] Sent: Tuesday, November 17, 2009 5:29 PM To: Bruce Dunne Cc: VL@vtinc.net; Junior Rojas; Matthew Brendel Subject: vp - PARK - ADDENDUM #1 Bruce – This is the correct design description for the stone: Stone: Blue/Green Chinese or Blue/Gray Pennsylvania Thickness: 3 cm Finish: Thermal Edges: top and bottom to be saw cut Edges: sides to be chopped, snapped or saw cut Height: all stones to be 4” Length: varies see below * = 20’-0” Radius = Lengths Vary 5”to 13” * = 38’-0” Radius = Lengths Vary 5”to 16” * Flat Surface = Lengths Vary 5”to 21” Joints: as small as possible, ¼” maximum Mortar: to be selected by LA Concrete caps: All concrete caps to be 4” high except at lake edge wall where caps will remain 6” high. Power Rake: Where the existing grades are to remain unchanged, scarify the soil with a roto-till to a depth of 4” to 6”. Re-establish final grading after scarification. We will revise the drawings in the “for construction” package. Let me know if you need additional information. -RJ Robyn Dunn Jacobson, AIA Managing Director KEVIN SLOAN STUDIO 4145 Travis, Suite 105 Dallas, Texas 75204 Office: 214.379.1061 Fax: 214.528.6296 www.kevinsloanstudio.com