Looks good with some revisions. Need to even up the edges so are closer to being equal and not so irregular (it was highly so) and change method of attachment. They drilled through the top of the limestone cap into the wall, drove rods into the wall and then filled the drill holes. The consensus from Clay and UDR was to drill the wall, epoxy rods into the wall, drill the cap, and then epoxy the cap onto the rods as well as placing mortar between the wall and cap. The cap overhangs the wall by about 6” and I expressed a concern about the pressure that will be put on the cap when people stand on the edge of the cap and causing it to loosen up. Eric said probably be best to epoxy the cap to wall as well. Parks Operations Manager Town of Addison Office: 972-450-2863 Fax: 972-450-2834 From: Slade Strickland Sent: Tuesday, July 20, 2010 8:49 AM To: Ron Lee Subject: FW: Limestone Cap at Vitruvian What did you think? Slade Strickland Director of Parks and Recreation Town of Addison P.O. Box 9010 Addison, Texas 75001-9010 Direct Office - 972.450.2869 Cell - 972.489.4426 Email - sstrickland@addisontx.gov From: Clay Barnett Sent: Tuesday, July 20, 2010 8:38 AM To: Slade Strickland Subject: RE: Limestone Cap at Vitruvian It is near the Esplanade. Ron Lee went to see it. Clay Barnett, P.E. Town Engineer Town of Addison 16801 Westgrove Drive Addison, TX 75001-2818 Office: (972) 450-2857 From: Slade Strickland Sent: Tuesday, July 20, 2010 8:33 AM To: Clay Barnett Subject: RE: Limestone Cap at Vitruvian Where is it located. I can go by in the morning to look at it. Slade Strickland Director of Parks and Recreation Town of Addison P.O. Box 9010 Addison, Texas 75001-9010 Direct Office - 972.450.2869 Cell - 972.489.4426 Email - sstrickland@addisontx.gov From: Clay Barnett Sent: Monday, July 19, 2010 10:29 AM To: Lea Dunn; Carmen Moran; Slade Strickland; Ron Whitehead Subject: Limestone Cap at Vitruvian Vitruvian Team, There is a section of the Lake Edge Wall with the limestone cap that has been completed at Vitruvian Park. The contractor is seeking approval prior to proceeding with the installation for the rest of the work. I have commented to them that they cannot drill holes in the top of the rock. Otherwise, I believe it looks great. Please let me know if you are interested in seeing it. Thanks, Clay Barnett, P.E. Town Engineer Town of Addison 16801 Westgrove Drive Addison, TX 75001-2818 Office: (972) 450-2857