Hi Eric,

Thanks for the question. I have some ideas and will discuss with Robyn first thing. We'll have an answer to you ASAP.

'best,

Kevin Sloan
Kevin Sloan Studio
2400 Empire Central, Suite F
Dallas, Texas 75235-4342
Phone: 214.459.1784
Cel:   214.789.6327
Fax:   214.350.4849



-----Original Message-----
From: Eric T. Little [mailto:ELittle@udr.com]
Sent: Tue 8/2/2011 2:20 PM
To: Kevin Sloan; Robyn Jacobson
Cc: Clay Barnett; Tom Lamberth; Nick Jacob
Subject: FW: Mitigation Area - Reach 1

Kevin,

Please see the attached. We have gotten permission from the COE to change the portion of Reach 1 outside of the mitigation area from the natural seed to sod.

A question has come up on how we delineate the mow (sod) area from the non-mow (seed) area. I would like something that is cost effective, that disturbs the soil the least, but doesn't
look cheap.

Any ideas?

From: Eric T. Little
Sent: Monday, August 01, 2011 2:54 PM
To: cbarnett@addisontx.gov
Cc: 'Slade Strickland'; Tom Lamberth; Nick Jacob; 'Jennifer Haynes(jennifer@ntexcon.com)'
Subject: FW: Mitigation Area - Reach 1

Clay,

We met with Rudi a few minutes ago and he agrees, the area outside of the blue band on the attachment is not part of the mitigation area. We can change this from the seed/weed to sod.

Here is how much that change would cost:


Contract

Add Reach 1

203

MIDIRON BERMUDA SOD

181816

SF

$    0.20

 $36,363.20

46700

SF

$    0.20

 $         9,340.00



I want to make sure everyone is ok with this before we give the go ahead.

We would also need to designate the mitigation area with signage like "Mitigation Area - No Mowing Allowed" or something to that effect.

Thanks,

Eric


From: Bruce Dunne [mailto:bdunne@icon-engineers.com]
Sent: Monday, August 01, 2011 1:47 PM
To: Eric T. Little; Joel Massey; Tom Lamberth
Subject: RE: Mitigation Area - Reach 1

Our commitment for mitigation is 30 feet (plus or minus - it gets a little less where the walking trail cuts into this area near the bridge) from the bank edge.  The area outside the
mitigation area that could be landscaped is approximately 1.07 acres (see attached exhibit).

From: Eric T. Little [mailto:ELittle@udr.com]
Sent: Monday, August 01, 2011 12:05 PM
To: Bruce Dunne; Joel Massey; Tom Lamberth
Subject: Mitigation Area - Reach 1

Bruce,

We are meeting today with Rudi to talk about changing the areas in Reach 1 outside of the mitigation from the natural seed mix (ie weeds) to turf. The attachment is pretty much the only
drawing I have that indicates where the mitigation area actually is.

We need a drawing with dimensions so we can price this. It would also be helpful to get it staked so our operations folks can see what we are talking about.

Thanks,

Eric