Eric,

 

I do not see an issue with this.  Please have the change order prepared along with the other items we removed from CO #6.  I will need to take this one to council for approval.  We can
add the signs as well.  I think we need to match the design of the other signs in the park.  Is there someone on board who can provide us with a design.

 

Also, we may consider placing landscape edging or something similar so that there is a clear boundary between the mow and non-mow area.

 

Thanks,

Clay Barnett, P.E.

Town Engineer

Town of Addison

16801 Westgrove Drive

Addison, TX 75001-2818

Office: (972) 450-2857

 <http://www.addisongreen.info/> 

 

From: Eric T. Little [mailto:ELittle@udr.com] 
Sent: Monday, August 01, 2011 2:54 PM
To: Clay Barnett
Cc: Slade Strickland; Tom Lamberth; Nick Jacob; 'Jennifer Haynes(jennifer@ntexcon.com)'
Subject: FW: Mitigation Area - Reach 1

 

Clay,

 

We met with Rudi a few minutes ago and he agrees, the area outside of the blue band on the attachment is not part of the mitigation area. We can change this from the seed/weed to sod.

 

Here is how much that change would cost:

 

		Contract

	Add Reach 1

	
203

	MIDIRON BERMUDA SOD

	181816

	SF

	$    0.20 

	 $36,363.20 

	46700

	SF

	$    0.20 

	 $         9,340.00 

	
										

 

I want to make sure everyone is ok with this before we give the go ahead.

 

We would also need to designate the mitigation area with signage like “Mitigation Area – No Mowing Allowed” or something to that effect.

 

Thanks,

 

Eric

 

 

From: Bruce Dunne [mailto:bdunne@icon-engineers.com] 
Sent: Monday, August 01, 2011 1:47 PM
To: Eric T. Little; Joel Massey; Tom Lamberth
Subject: RE: Mitigation Area - Reach 1

 

Our commitment for mitigation is 30 feet (plus or minus – it gets a little less where the walking trail cuts into this area near the bridge) from the bank edge.  The area outside the
mitigation area that could be landscaped is approximately 1.07 acres (see attached exhibit).

 

From: Eric T. Little [mailto:ELittle@udr.com] 
Sent: Monday, August 01, 2011 12:05 PM
To: Bruce Dunne; Joel Massey; Tom Lamberth
Subject: Mitigation Area - Reach 1

 

Bruce,

 

We are meeting today with Rudi to talk about changing the areas in Reach 1 outside of the mitigation from the natural seed mix (ie weeds) to turf. The attachment is pretty much the only
drawing I have that indicates where the mitigation area actually is. 

 

We need a drawing with dimensions so we can price this. It would also be helpful to get it staked so our operations folks can see what we are talking about.

 

Thanks,

 

Eric