I assume the pricing for the trench drain was all inclusive, but I have sent Zach and email requesting confirmation. Will verify shortly. From: Bruce Dunne [mailto:bdunne@icon-engineers.com] Sent: Monday, January 31, 2011 2:12 PM To: Eric T. Little; Clay Barnett; Robyn Jacobson Subject: RE: Trench Drain Eric – the change order pricing that I needed from NTC included three line items: 1. Klassic Trench Drain w/ Grate 2. Klassic In-Line Catch Basin 3. Connect Catch Basin to Storm Drain The pricing we got back from Zach appears to be a lump sum price. Please confirm that his pricing is all inclusive for these three items. The deductions for the previous grotto drainage design totals $40,356. NTC’s price for the stainless steel substitution is $41,918, an increase of $1,562 (assuming his price is all inclusive). A $9,000 decrease by going with galvanized steel doesn’t seem to be worth the large appearance difference between the stainless and the galvanized. Might be worth asking Zach if he can decrease his price for stainless by $1,562 and then the whole system would be a wash. From: Eric T. Little [mailto:ELittle@udr.com] Sent: Monday, January 31, 2011 12:42 PM To: Clay Barnett; Bruce Dunne; Robyn Jacobson Subject: FW: Trench Drain FYI, Please review and give me direction on the trench drain. Thanks, Eric From: Zach Fusilier [mailto:zfusilier@ntexcon.com] Sent: Monday, January 31, 2011 12:11 PM To: Eric T. Little Cc: 'Jennifer Haynes'; jhodsdon@ntexcon.com; mikesr@ntexcon.com Subject: Trench Drain Eric, Here is a submittal on a ADA rated galvanized trench drain that has the same dimensions and characteristics as the stainless steel type that is specified. Please note that the attached type represents a 9K savings from the previously submitted price. Please review and let me know if acceptable and I will revise the price and formally re-submit. Zach Fusilier North Texas Contracting 4999 Keller Haslet Road Keller, Texas 76248 Office - 817-430-9500 Cell - 817-819-6691