This matches the last direction that I can find. There were a lot of conversations about “lengths” but I think this is accurate. Clay? ________________________________ From: Eric T. Little Sent: Tuesday, June 15, 2010 3:29 PM To: Jennifer Haynes; Nick Jacob; Clay Barnett; Tom Lamberth Subject: RE: vp - PARK - ADDENDUM #1 Clay/Tom: Do you guys know if the Stone has changed for the park? Apparently there was some discussion by the Town on changing the sizes shown below, but we aren’t sure if that ever happened. Stone: Blue/Green Chinese or Blue/Gray Pennsylvania Thickness: 3 cm Finish: Thermal Edges: top and bottom to be saw cut Edges: sides to be chopped, snapped or saw cut Height: all stones to be 4” Length: varies see below * = 20’-0” Radius = Lengths Vary 5”to 13” * = 38’-0” Radius = Lengths Vary 5”to 16” * Flat Surface = Lengths Vary 5”to 21” Joints: as small as possible, ¼” maximum Mortar: to be selected by LA Eric Little Project Manager, UDR 5430 LBJ Freeway, Suite 1250 Dallas, TX 75240 Ph: 972.774.0552 Fx: 972.991.4113 Cell: 214.641.5761 www.UDR.com From: Jennifer Haynes [mailto:jennifer@ntexcon.com] Sent: Tuesday, June 15, 2010 3:26 PM To: Eric T. Little; Nick Jacob Subject: FW: vp - PARK - ADDENDUM #1 I need direction on the stone dimensions as it is being cut in China right now. I will send out an RFI, but I don’t believe the “issued for construction” specs were changed. From: Robyn Jacobson [mailto:rdj@kevinsloanstudio.com] Sent: Tuesday, June 15, 2010 2:49 PM To: Jennifer Haynes Cc: bdunne@icon-engineers.com Subject: FW: vp - PARK - ADDENDUM #1 Jennifer – I believe that this was the final direction. I have been trying to get Tom Lamberth to confirm, but I have not been able to reach him. ________________________________ From: Robyn Jacobson Sent: Tuesday, November 17, 2009 5:29 PM To: 'Bruce Dunne' Cc: Victor Lissiak (VL@vtinc.net); Junior Rojas; 'Matthew Brendel' Subject: vp - PARK - ADDENDUM #1 Bruce – This is the correct design description for the stone: Stone: Blue/Green Chinese or Blue/Gray Pennsylvania Thickness: 3 cm Finish: Thermal Edges: top and bottom to be saw cut Edges: sides to be chopped, snapped or saw cut Height: all stones to be 4” Length: varies see below * = 20’-0” Radius = Lengths Vary 5”to 13” * = 38’-0” Radius = Lengths Vary 5”to 16” * Flat Surface = Lengths Vary 5”to 21” Joints: as small as possible, ¼” maximum Mortar: to be selected by LA Concrete caps: All concrete caps to be 4” high except at lake edge wall where caps will remain 6” high. Power Rake: Where the existing grades are to remain unchanged, scarify the soil with a roto-till to a depth of 4” to 6”. Re-establish final grading after scarification. We will revise the drawings in the “for construction” package. Let me know if you need additional information. -RJ Robyn Dunn Jacobson, AIA Managing Director KEVIN SLOAN STUDIO 4145 Travis, Suite 105 Dallas, Texas 75204 Office: 214.379.1061 Fax: 214.528.6296 www.kevinsloanstudio.com No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.829 / Virus Database: 271.1.1/2929 - Release Date: 06/15/10 01:35:00