FYI -----Original Message----- From: Eric T. Little Sent: Monday, June 13, 2011 8:58 AM To: 'AHarper@Austin-Ind.com' Subject: Re: Ponte approach pour They were supposed to paint Saturday, but no showed. Clay is going to end time on the painting this Friday (more than likely). These guys really need to start work earlier than 10am - the steel is getting too hot to paint on. I would push on them as hard as you can. I'll let you know what Clay says on the approach slab repair. Thanks, Eric ----- Original Message ----- From: Andrew Harper [mailto:AHarper@Austin-Ind.com] Sent: Monday, June 13, 2011 07:54 AM To: Eric T. Little Subject: RE: Ponte approach pour Just talked to Donny. They're sanding and putting intermediate coat on Ponte today. Top coat on Bella tomorrow. Top coat on Ponte Wednesday. Clearcoat on both arches Thursday. The wind last week has been keeping them from spraying, and the dust has been an even bigger problem. Andrew Harper Cell (214) 886-6666 -----Original Message----- From: Eric T. Little [mailto:ELittle@udr.com] Sent: Monday, June 13, 2011 8:38 AM To: Andrew Harper Subject: Re: Ponte approach pour Will do. What's going on with the painting? Nothing seems to be happening. ----- Original Message ----- From: Andrew Harper [mailto:AHarper@Austin-Ind.com] Sent: Monday, June 13, 2011 06:51 AM To: Eric T. Little Subject: RE: Ponte approach pour Eric, let me know if everyone is good with the repair. Wanted to make sure before we get to sawing on Bella this afternoon. Thanks, Andrew Harper Cell (214) 886-6666 -----Original Message----- From: Eric T. Little [mailto:ELittle@udr.com] Sent: Thursday, June 09, 2011 6:49 PM To: Andrew Harper Subject: Re: Ponte approach pour 10-4 ----- Original Message ----- From: Andrew Harper [mailto:AHarper@Austin-Ind.com] Sent: Thursday, June 09, 2011 05:44 PM To: wgeistweidt@kleinfelder.com ; Eric T. Little; Derek Dodson Subject: Ponte approach pour We're tentatively pouring the Ponte approach repair tomorrow morning at 9. Will confirm with TXI first thing Friday and let y'all know.