See below. It appears that the spec HALFF used is for a modified Keystone bridge. At least that’s Contech’s position. 

 

Thanks,

 

Eric Little

Project Manager, UDR

5430 LBJ Freeway, Suite 1250

Dallas, TX 75240

Ph: 972.774.0552

Fx: 972.991.4113

Cell: 214.641.5761

www.UDR.com

 

From: Andrew Harper [mailto:AHarper@Austin-Ind.com] 
Sent: Thursday, September 02, 2010 3:37 PM
To: Eric T. Little; Todd Henson
Subject: RE: Vitruvian Pedestrian Bridge

 

According to Contech:

 

In the project specifications section 133423 section 2.3 the bridge is called out as “Continental Keystone Pedestrian Bridge that has one (1) diagonal per panel and plumb end vertical
members.”  This would place the bridge in a category we call “modified Keystone”.  

 

I’m gonna go out on a limb here and say that the picture drawn on the plans isn’t a Continental Keystone Ped Bridge like the specs are requiring, but I’m waiting to get more info from
Contech.  I also talked to Jonathan, and he was looking closer into the specs as well.

 

Thanks,

 

Andrew Harper