Dianne,

 

As we discussed in the meeting, we are providing one photo electric controlled circuit to the bridge for street lighting and one photo electric / time clock controlled circuit to the
bridge for accent lighting.  This is the same for both Ponte Avenue or Bella Lane.

 

You will need transformer(s) for the LED fixtures and light fixture circuit protection for all the fixtures at the bridge.

 

Joel A. Massey

Project Manager

icon Consulting Engineers, Inc.

Bicentennial Financial Center

250 W. Southlake Blvd., Suite 117

Southlake, Texas  76092

Phone: (817) 552-6210

Fax: (817) 552-3126

Mobile: (817) 229-7944

jmassey@icon-engineers.com

 

 

 

From: Popken, Dianne [mailto:DPopken@Halff.com] 
Sent: Friday, July 30, 2010 6:56 PM
To: Joel Massey
Cc: Christiansen, Eric; Bruce Dunne; Barnett, Clay
Subject: Lighting Circuit coordination

 

Joel

As a follow-up to our conversation after the coordination meeting 7-29-10, here are the circuit requirements for the Ponte Bridge:

 

Streetlight circuit     4 Type A fixtures                     10 Amps at 240V

Accent light circuit  Type D, F and on SA poles       15 Amps at 240V

Accent light circuit  LED Type E                             10 Amps at 120V

 

Please provide the three circuits listed above and the locations for connection.

 

Dianne M. Popken, P.E.

Vice President

Halff Associates, Inc.

1201 N Bowser Road,

Richardson, Texas 75081

214-346-6306

Cell 214-724-8150

Fax 214-739-0095

dpopken@halff.com