Eric, I forwarded these pictures on to Andrew and Todd with Austin Bridge and Road since they are the general contractor. I also pointed out an area to Andrew this morning that I had concern about. This spot is similar to the ones shown in David's pictures. The short answer is No not from me. Wade Geistweidt Engineering Tech 2035 Central Circle Suite 110 McKinney, TX 75069 o| 972.562.4677 c| 469.576.9951 f | 972.542.4366 ________________________________ From: Christiansen, Eric [echristiansen@halff.com] Sent: Thursday, July 14, 2011 3:59 PM To: Wade Geistweidt Cc: Lara, Amanda; Barnett, Clay Subject: RE: Vitruvian Park-Pointe Ave Bridge Wade, This is obviously not acceptable. Has the painter been informed that this must be corrected? Eric S. Christiansen, P.E., SECB Senior Structural Engineer From: Wade Geistweidt [mailto:WGeistweidt@kleinfelder.com] Sent: Thursday, July 14, 2011 2:15 PM To: pjacob@udr.com; elittle@udr.com; Andrew Harper; Todd Henson; Barnett, Clay; Christiansen, Eric; Lara, Amanda Cc: Robert Boswell; Rick Hammerberg; David T. Hernandez Subject: FW: Vitruvian Park-Pointe Ave Bridge Gentlemen, I am forwarding some pictures that David Hernandez took today. These pictures are of areas that appear to contain micro bubbles in the finish of the clear coat. These micro bubbles could have been caused by humidity from the creek, irrigating the sod, or the clear coat drying before all the gases in the clear coat could escape. Thanks Wade Geistweidt Engineering Tech 2035 Central Circle Suite 110 McKinney, TX 75069 o| 972.562.4677 c| 469.576.9951 f | 972.542.4366 Error! Filename not specified. ________________________________ From: David T. Hernandez Sent: Thursday, July 14, 2011 12:18 PM To: Robert Boswell Cc: Wade Geistweidt Subject: Vitruvian Park-Pointe Ave Bridge Robert, These areas have what appears to be tiny bubbles entrapped within the clear coat. It almost seems like moisture exposure. I was thinking maybe humidity came off the river so I slung a sling here next to the river and got 98 dry & 81 wet which is 48% RH Steel temp right now is about 110 @ 11:30AM Both arches have the tiny bubbles