Austin will upload their own submittals to Project Mates. I uploaded this one for them because we have not had our PM training session yet. ________________________________ From: Christiansen, Eric To: thenson@austin-ind.com ; Eric T. Little Cc: Nick Jacob; Barnett, Clay Sent: Wed Jul 07 13:06:06 2010 Subject: FW: Slide Bearings For Addison Arches - AFCO Contr. No. 10667 Todd and Eric, Yesterday, we received an RFI from AFCO Steel in Little Rock, AR, regarding the use of a substitute slide bearing for the arches. While we are willing to review this submittal, we wanted to make sure it went through the proper channels, which is why we're forwarding it to your attention. We have two simple questions: 1. To whom should we send our response to the attached RFI? 2. Who will be coordinating future submittals for this project: Austin or UDR? Please let me know and we'll respond appropriately. Thanks, Eric Eric S. Christiansen, P.E., SECB, LEED AP Senior Structural Engineer HALFF ASSOCIATES, INC. 1201 North Bowser Road Richardson, Texas 75081 Phone 214-346-6284 Fax 214-739-0095 Cell 972-955-2996 www.halff.com From: Collier, Mike [mailto:MCollier@AfcoSteel.com] Sent: Wednesday, July 07, 2010 10:35 AM To: Lara, Amanda Subject: Slide Bearings For Addison Arches - AFCO Contr. No. 10667 Amanda, Re: Town of Addison Ponte Ave. and Bella Lane Vehicular Bridges Here are the product data sheets for the Con-Serv slide bearings that we intend to furnish for the Addison vehicular bridges (We will be supplying the Type CSA bearings). Please verify that these slide bearings can be furnished as an approved equal for the Fluorogold slide bearings as shown on the contract drawings. Thanks for your cooperation, Mike Collier AFCO Steel, LLC Project Manager - Bridges Ph. (501) 340-6262