Nancy and Lea,

We believe we have figured out why the arches looked so drab in the renderings we provided this morning. Unfortunately, the interpretation of the red color is incorrect on the previous
Phase 1D drawings. We used the so-called RGB values from Sheet SB215 without comparing the resulting color to the named color (Pantone #200). If we had, we would have noticed the RGB
color was not nearly as bright as it should have been.

 

After realizing the error, we re-rendered the images. I will send the images shortly, so let me know if you don't receive them. (Since the files are rather large, you may have trouble
receiving them.) In order to keep the messages to a manageable size, I will attach four images to my next message and the remaining three images to a second message.

 

Please let me know if this color seems more like what you remember.

 

Enjoy!

Eric

 

Eric S. Christiansen, P.E., SECB, LEED AP

Senior Structural Engineer

 

	

	
HALFF ASSOCIATES, INC.

1201 North Bowser Road

Richardson, Texas 75081

Phone 214-346-6284

Fax 214-739-0095

Cell 972-955-2996

www.halff.com