Frank,

 

I organized all our prints earlier this week and found a few interesting
ones. One is titled "Overlay Taxiways, Install Medium Intensity Taxiway
Lights and Guidance Signs", which is Taxiway Alpha area. However all of
the electrical section is missing. It is dated February 1993.

 

I also found one titled "Construct West Taxiway and connectors with
Drainage Improvements (South Section)", which is Taxiway Bravo area. It
is dated December 1997.

 

If this is any help then swing by and I'll show you what we have here.
The Town may have a copy of these as well, I'm not sure. 

 

You may have better luck getting additional info from the engineering
firm which worked on these than what I am getting so far.

 

Thanks,

 

Dave Foster

Addison Airport

Maintenance Manager

214-683-7583 cell

David.Foster@addisonairport.net

 

________________________________

From: McIllwain, Frank O. [mailto:FOMcIllwain@garverusa.com] 
Sent: Thursday, October 08, 2009 10:33 AM
To: cbarnett@addisontx.gov
Cc: Mcanally, Joe; david.foster@addisonairport.net; Siemens, Paul, T;
Jenkinson, Joel; ncline@addisontx.gov; macevedo@addisontx.gov
Subject: RE: Airport CIP Meeting

 

Clay:

 

Tim and I want to look through the Town files and archives for airport
as-built drawings. Will you be available for Tim and I come to your
office at 9:30am tomorrow?

 

Frank McIllwain, PE
Garver, LLC

 

From: Jenkinson, Joel [mailto:Joel.Jenkinson@wgint.com] 
Sent: Friday, October 02, 2009 9:16 AM
To: macevedo@addisontx.gov; ncline@addisontx.gov; cbarnett@addisontx.gov
Cc: Joe.Mcanally@wgint.com; david.foster@addisonairport.net; McIllwain,
Frank O.; Siemens, Paul, T
Subject: Airport CIP Meeting

 

All:

 

            We have an Airport CIP meeting on the calendar for 10:00am
Tuesday 10/6.  Given that we just met Wednesday, I think this meeting
would be superfluous.  In addition, it conflicts with the FAA
Partnership Conference being held in downtown Dallas.  The next
scheduled CIP meeting is Tuesday 11/3 (at the usual 10:00am time).  The
runway borings will have been completed by then, as well as all of the
surveying.  I don't see a need to have another meeting before the next
scheduled meeting on 11/3, but if anyone has a different view please
share it.

            In the interim, we need to focus on collecting whatever
information is available on our runway lighting systems.  Dave has been
doing some troubleshooting and evaluation work, and has found that some
places where we thought the cables were in conduit are in fact
direct-buried.  The light cans we have in some areas will also need to
be replaced ... it is possible that the entire runway edge lighting
system will need to be removed and replaced.  If Public Works has any
as-built drawings or even plans for any airfield lighting (I believe the
runway edge lights were done circa 1992) it would be really helpful if
we could locate those and provide copies to Garver.  Dave will continue
and hopefully complete his survey of the runway lighting circuits by
11/3, so we should have a good idea of what is actually out there in
time for the meeting.

 

Best Regards,

 

Joel

 

  

Joel Jenkinson

Director, Addison Airport

  main: (972) 392-4850

  fax: (972) 788-9334