The thread pattern for the Pumper Nozzle on all hydrants is a 4-480, which happens to be what the hydrant companies refer to as a “Dallas Spec”.

 

Thank you,

Jason Sutton

Town of Addison

Utilities Supervisor

Line Maintenance

(972)-450-2826

jsutton@addisontx.gov



 

From: Phillip Kagarice 
Sent: Thursday, May 26, 2011 5:28 PM
To: Clay Barnett; 'davefoster@addisonairport.net'; Jerry Davis; 'mrmcanally@garverusa.com'; 'gjseeding@yahoo.com'; 'bgm@easlp.com'; 'mpa@easlp.com'; 'jdtolmachoffa@garverusa.com'; 'rprservices@gmail.
com'; 'matt@irrigationdistributors.com'
Cc: Jason Sutton
Subject: Static Pressure Readings

 

I was able to visit all 4 hydrant locations today that will be utilized during this temporary irrigation project and take a static pressure readings. See below.

 

Ø  Glen Curtiss  54 psi 

Ø  George Haddaway  54 psi 

Ø  Richard Byrd  56 psi

Ø  Dooley Rd  60 psi

 

 

PHIL KAGARICE | UTILITIES SUPERVISOR / WATER QUALITY
Addison Service Center | 16801 Westgrove Dr. | Addison TX 75001
ofc 972.661.3160| fax 972.716.0834 |  pkagarice@addisontx.gov