Frank,
Could you shoot me a response to the first two questions below?
I will attach the barricade detail to the response to him.
Thanks,
Clay Barnett, P.E.
Town Engineer
Town of Addison
16801 Westgrove Drive
Addison, TX 75001-2818
Office: (972) 450-2857
-----Original Message-----
From: Joe Helmberger [mailto:JoeHelmberger@verizon.net]
Sent: Tuesday, February 16, 2010 11:13 AM
To: Clay Barnett
Subject: RE: ExecHangar
Clay, I am getting the owner to get me the largest plane type as required by GC(a).
Regarding GC(b) – We are not proposing to build a taxiway. We are going to re-build the middle drive approach and pour new apron pavement. I am not certain what you are asking here.
Regarding GC(c) Do you want coordinates on every point on the proposed pavement? Current construction staking methods allow me to send my design file directly to a surveyor for him
to upload into his instrument. Coordinates are transferred seamlessly. I have provided, what I thought, were enough dimensions for the review engineer to understand what is proposed.
GC(e) states that details and notes would be attached. I did not receive the attachment.
Thanks for your help clarifying your comments.
Joe
________________________________
From: Clay Barnett [mailto:cbarnett@addisontx.gov]
Sent: Tuesday, February 16, 2010 9:49 AM
To: Joe Helmberger (joehelmberger@verizon.net)
Cc: Corey Van Trease (cvantrease@vantreasedevelopment.com)
Subject: ExecHangar
Joe,
Attached are the comments for the ExecHangar project.
The Public Works assigned to this project is PW2010-01. Please place this number of the cover sheet for the project.
If you have any questions, please feel free to contact me.
Thanks,
Clay Barnett, P.E.
Town Engineer
Town of Addison
16801 Westgrove Drive
Addison, TX 75001-2818
Office: (972) 450-2857