Clay thanks - my strip map looked very similar, we'll tweak it and make the adjustments below.
________________________________
From: Clay Barnett [mailto:cbarnett@addisontx.gov]
Sent: Monday, May 03, 2010 11:19 AM
To: Romanowski, Mike
Subject: RE: Spring Valley
Mike,
Attached is the preliminary plan for Spring Valley as prepared with Icon. We have a couple issues with this plan:
1. It shows an acceleration lane instead of a right-turn lane off of Spring Valley onto Vitruvian Way.
2. The crosswalk on the north side at the DISD site is not aligned properly.
If you have any questions, please let me know.
Thanks,
Clay Barnett, P.E.
Town Engineer
Town of Addison
16801 Westgrove Drive
Addison, TX 75001-2818
Office: (972) 450-2857
From: Romanowski, Mike [mailto:mromanowski@halff.com]
Sent: Monday, May 03, 2010 9:42 AM
To: Clay Barnett
Subject: RE: Spring Valley
Clay,
We've got the American Airlines Center, probably one of the biggest public/private developments we've worked on. Halff did planning, environmental, infrastructure design, surveying,
construction administration and inspection. I designed a frontage road for that project, including TxDOT/NTTA/City of Dallas/Hillwood Development coordination. I'll talk about that one
in the interview.
I've done a strip map laying out the project, which I'll bring.
Does the interview room have a screen? Can we get in at 1:30 +/- to set it up? I'm planning on bringing two of my engineers with me. I'll see you Wednesday.
________________________________
From: Clay Barnett [mailto:cbarnett@addisontx.gov]
Sent: Friday, April 30, 2010 2:14 PM
To: Romanowski, Mike
Subject: RE: Spring Valley
Mike,
Please include any experience that Halff has with Private-Public partnerships and large scale mixed use.
Thanks,
Clay Barnett, P.E.
Town Engineer
Town of Addison
16801 Westgrove Drive
Addison, TX 75001-2818
Office: (972) 450-2857
From: Romanowski, Mike [mailto:mromanowski@halff.com]
Sent: Friday, April 30, 2010 2:07 PM
To: Clay Barnett
Subject: RE: Spring Valley
Clay,
Since the written SOQ is no longer needed, I plan to have my presentation focus on the RFQ questions and requirements.
________________________________
From: Clay Barnett [mailto:cbarnett@addisontx.gov]
Sent: Thursday, April 29, 2010 2:44 PM
To: Romanowski, Mike
Subject: RE: Spring Valley
Mike,
Attached is the RFQ.
The relocation of Brookhaven Club Drive will be done by Icon. The design of Spring Valley and the intersection will be by the engineer selected from the RFQ.
If you have any additional questions, please let me know.
Thanks,
Clay Barnett, P.E.
Town Engineer
Town of Addison
16801 Westgrove Drive
Addison, TX 75001-2818
Office: (972) 450-2857
From: Romanowski, Mike [mailto:mromanowski@halff.com]
Sent: Thursday, April 29, 2010 2:12 PM
To: Clay Barnett
Subject: Spring Valley
Clay,
One question I had after looking at aerial, will the project include re-configuring the intersection at Vitruvian Way?
Mike Romanowski, PE
Vice President
HALFF ASSOCIATES, INC.
1201 North Bowser Road
Richardson, Texas 75081
Phone 214-346-6270
Fax 214-739-0095
www.halff.com
******************************************************************************************************************
This e-mail and any files or attachments transmitted with it contains Information that is confidential and privileged. This document may contain Protected Health Information (PHI) or
other information that is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further disclosures are prohibited
without proper authorization. If you are not the intended recipient, any disclosure, copying, printing, or use of this information is strictly prohibited and possibly a violation of
federal or state law and regulations. If you have received this information in error, please delete it and notify Hamid Khaleghipour at 972-450-2868 immediately. Thank you.
*******************************************************************************************************************