FYI Parks Operations Manager Town of Addison Office: 972-450-2863 Fax: 972-450-2834 From: Jim Clark Sent: Tuesday, September 06, 2011 1:21 PM To: Ron Lee Cc: 'dlw@americanlandscapesystems.com'; Modesto Orona; Oscar Martinez; Ricky Smith Subject: Spring Valley walk through On the walk through this morning we need to have the following items need attention on the new system: Spring Valley: Controller A: Zone 2: Two pop-ups are too low. Zone 3: There is a slight leak by a pop-up. Zone 4: One pop-up is too low and one pop-up is too high Zone 5: One rotor is too low; one other rotor is crooked. Zone 7: Need to move 15’ EST (End Strip) pop-up from bed to the turf area; one pop-up is too low; one pop-up is crooked; need dirt around pop-ups; two pop-ups are too high; need to change 8H (Half) for 5H nozzle; move over pop-up in turf and change its nozzle to 15’ EST Zone 10:Need dirt around rotors; one rotor missing a cap; four rotors are too low; one rotor is leaking Zone 12: One rotor is too low; need to add a pop-up with either 15’ SST (Side Strip) or 15’ EST nozzle. Zone 13: Three clogged nozzles; one pop-up is too low; one pop-up is too high; the valve sticks on too long before it shuts down Zone 15: One 10” round box is too low; one pop-up is too low; need dirt around pop-ups Zone 16: Need dirt around pop-ups; need two 10H for two 8H nozzles. Zone 18: One pop-up is crooked Zone 19: Three pop-ups are too low Zone 20: One clogged nozzle; need dirt around pop-ups Zone 21: Two pop-ups are too low; need dirt around pop-ups Zone 24: One bubbler pop-up is too high Controller B: Zone 1: Move valve box over – Too close and can’t remove filter for cleaning Zone 2: Two pop-ups are too low and are crooked; need dirt around pop-ups Zone 3: Need dirt around pop-ups Zone 4: One rotor is too low; two rotors don’t retract and are missing caps; one valve box is too low Zone 5: Two rotors are too low; one rotor is missing a cap; one rotor is too high; adjust rotor(s) so as to not spray onto sidewalk excessively Zone 9: Four pop-ups are too low Zone 10: Two rotors are too low Zone 11: One clogged nozzle Zone 12: One clogged nozzle; one low pop-up; one crooked pop-up Zone 13: One clogged nozzle Zone 14: One crooked pop-up Zone 15: One clogged nozzle Zone 16: Five pop-ups are too low Zone 17: Need 10H for 8H nozzle Zone 18: Seven low pop-ups, 15’ SST for 8Q nozzle along fence Zone 19: Two clogged nozzles; 14 pop-ups are too low Zone 20: Most of the pop-ups are too low; need dirt around pop-ups. Zone 21: A few bubbler pop-ups are too low in rest area Zone 22: One valve box is box is too high Zone 23: One popup is too high; four pop-ups are too low Zone 24: Three bubbler pop-ups are too high Zone 25: Need to move over two bubbler heads towards the tree Zone 26: One bubbler pop-up is too high; one bubbler pop-up is too low and needs to be moved towards the tree Zone 27: One bubbler pop-up needs to be moved towards the tree; leak by a tree stake close to a popup Note: Any zone number not listed is OK.