________________________________

From: Joseph T. Angelone <jta@americanlandscapesystems.com> 
To: dlw@americanlandscapesystems.com <dlw@americanlandscapesystems.com> 
Cc: Slade Strickland; Josh Hodsdon <josh@ntexcon.com>; Ron Lee; Modesto Orona; Jim Clark; Oscar Martinez; Nancy Cline; Ricky Smith; Joey Davila <dvl@americanlandscapesystems.com>; K
Power <kpower@rhsitx.com>; Jason Shroyer (jshroyer@rhsitx.com) <jshroyer@rhsitx.com> 
Sent: Fri Jun 24 11:43:51 2011
Subject: Re: Irrigation Valve Wire Splices 


For simplicity for everyone this means controllers should be located close to water sources.  

Josh I have called several times after we spoke this morning please call I have plans with me.  Thank you.

Joseph T. Angelone


On Jun 24, 2011, at 11:30 AM, "Donnie Wolverton" <dlw@americanlandscapesystems.com> wrote:



	Gentlemen,
	
	My comment yesterday to Josh was mainly about flow meter cable splices. Per manufactures request, we can not have splices in the flow meter cable. This is a separate requirement that
does not comply with the irrigation wires splices discussed in the previous email. 
	
	Thank you,
	
	

	Donnie Wolverton 

________________________________

	From: Slade Strickland <sstrickland@addisontx.gov> 
	Date: Fri, 24 Jun 2011 10:05:17 -0500
	To: 'Josh Hodsdon'<josh@ntexcon.com>
	Cc: Ron Lee<rlee@addisontx.gov>; Modesto Orona<morona@addisontx.gov>; JimClark<jclark@addisontx.gov>; Oscar Martinez<omartinez@addisontx.gov>; NancyCline<ncline@addisontx.gov>; Ricky
Smith<rsmith@addisontx.gov>; dlw@americanlandscapesystems.com<dlw@americanlandscapesystems.com>; 'JoeDavila'<dvl@americanlandscapesystems.com>; 'K Power'<kpower@rhsitx.com>; Jason Shroyer
(jshroyer@rhsitx.com)<jshroyer@rhsitx.com>
	Subject: Irrigation Valve Wire Splices

	<image001.gif>

	Josh we are ok with splicing irrigation wiring for Spring Valley, since sections of the road are being completed in multiple phases.  I spoke with Joe Davila with American Landscape
Systems about it,  and I concur with him that we would like to minimize the splices to 4 splices if possible w/o holding things up.

	 

	Can we keep the splices to one splice in a 10” round box on the north side of SV, one on the south side and two in the center medians, or does this cause you delays?  The splice boxes
would be identical to how irrigation valve boxes are installed.

	 

	I do not want this to hold up anything relating to the road construction, so please let me know if this scenario will work.  

	 

	Thanks! 

	 

	Slade Strickland   Director of Parks and Recreation

	O972.450.2869  C972.489.4426  <mailto:sstrickland@addisontx.gov> sstrickland@addisontx.gov

	<image006.jpg>

	<image007.jpg>

	 

	************************************************************
	This e-mail and any files or attachments transmitted with it contain
	 Information that is confidential and privileged. This document may 
	contain Protected Health Information (PHI) or other information that is 
	intended only for the use of the individual(s) and entity(ies) to whom it 
	is addressed. If you are the intended recipient, further disclosures are 
	prohibited without proper authorization. If you are not the intended 
	recipient, any disclosure, copying, printing, or use of this information is 
	strictly prohibited and possibly a violation of federal or state law and 
	regulations. If you have received this information in error, please delete 
	it and notify Hamid Khaleghipour at 972-450-2868 immediately. Thank you.
	
	************************************************************