Clay, Here are the updated sheets that you requested. Let me know if you see anything else. Michael Barbier, E.I.T. Civil Engineer HALFF ASSOCIATES, INC. 1201 North Bowser Road Richardson, Texas 75081 Phone 214-217-6643 Fax 214-739-0095 www.halff.com ________________________________ From: Clay Barnett [mailto:cbarnett@addisontx.gov] Sent: Monday, September 27, 2010 9:57 AM To: Barbier, Michael Cc: Romanowski, Mike Subject: RE: DISD Plat Mark Up Michael, A few last things: 1. On the right-of-way dedications, do we need to run the new right-of-way at an angle east of the proposed driveway? If not, it would be best if it were parallel to the curb and offset by 10-12 feet (or the same distance as we have to the west). 2. Sheet DT-D1 still shows the bituminous bed for the median noses in the revised plans that were handed out on Thursday. I have attached the corrected detail. 3. On Sheet TS-2, please specify that the wireless radio is to be mounted on the T-1 signal arm by the opticom head. Please send the revised sheets when they are available. If you have any questions, please let me know. Thanks, Clay Barnett, P.E. Town Engineer Town of Addison 16801 Westgrove Drive Addison, TX 75001-2818 Office: (972) 450-2857 From: Barbier, Michael [mailto:mBarbier@Halff.com] Sent: Monday, September 27, 2010 9:31 AM To: Clay Barnett Cc: Romanowski, Mike Subject: DISD Plat Mark Up Clay, I have attached our updated mark up of the DISD plat per your comments last Thursday. Please let me know if you see anything else that needs to be modified. Thank you. Michael Barbier, E.I.T. Civil Engineer HALFF ASSOCIATES, INC. 1201 North Bowser Road Richardson, Texas 75081 Phone 214-217-6643 Fax 214-739-0095 www.halff.com