Mike, If we can get exactly what all right-of-way and easements we need from the school, I will get it over to them. Thanks, Clay Barnett, P.E. Town Engineer Town of Addison 16801 Westgrove Drive Addison, TX 75001-2818 Office: (972) 450-2857 From: Romanowski, Mike [mailto:mromanowski@halff.com] Sent: Tuesday, August 17, 2010 1:36 PM To: Clay Barnett; Nancy Cline Subject: FW: Spring Valley Road - Addison Whoever did the plat for the school, should add the easement that ONCOR needs. From: lbaldwin@oncor.com [mailto:lbaldwin@oncor.com] Sent: Tuesday, August 17, 2010 1:31 PM To: Romanowski, Mike Subject: RE: Spring Valley Road - Addison I am working on the plan for the relocation of the facilities on Spring Valley. In our meeting it was decided that an easement will be secured from DISD for the facilities to serve the existing temporary construction power. Has anyone contacted DISD about this? I will need an easement for a switchgear, a pole with primary riser, a pole with a transformer and the conductors to tie these facilities together. ________________________________ From: Romanowski, Mike [mailto:mromanowski@halff.com] Sent: Wednesday, August 11, 2010 12:51 PM To: Baldwin, Larry Subject: Spring Valley Road - Addison Larry – the realignment Michael sent solves most of the phasing issues. It also gets rid of most of the bends. Please mark up any changes, 90% plans going in tomorrow. We are going to require this DB be installed first, backfilled, then we go to work on the south half of the new roadway. There should be time before the need to pave to get the wires underground and the new switches up and running. Mike Romanowski, PE Vice President HALFF ASSOCIATES, INC. 1201 North Bowser Road Richardson, Texas 75081 Phone 214-346-6270 Fax 214-739-0095 www.halff.com Confidentiality Notice: This email message, including any attachments, contains or may contain confidential information intended only for the addressee. If you are not an intended recipient of this message, be advised that any reading, dissemination, forwarding, printing, copying or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by reply message and delete this email message and any attachments from your system.