Bruce, If you could send a map and I will get it over to them. Thanks, Clay Barnett, P.E. Town Engineer Town of Addison 16801 Westgrove Drive Addison, TX 75001-2818 Office: (972) 450-2857 From: Bruce Dunne [mailto:bdunne@icon-engineers.com] Sent: Monday, April 04, 2011 9:34 AM To: Clay Barnett Subject: RE: Vitruvian Water Flow Test Good morning Clay – Do we know which two hydrants were used (the static hydrant and the flowing hydrant)? There are four hydrants between Ponte and Spring Valley. If I know which ones were used I can determine the elevation of the hydrant from our plans. I would also like to know the flow rate (gallons per minute). Thanks. From: Clay Barnett [mailto:cbarnett@addisontx.gov] Sent: Monday, April 04, 2011 8:27 AM To: Bruce Dunne Subject: FW: Vitruvian Water Flow Test Bruce, Below are the results of the fire flow test. If you need any additional information, please let me know. Thanks, Clay Barnett, P.E. Town Engineer Town of Addison 16801 Westgrove Drive Addison, TX 75001-2818 Office: (972) 450-2857 From: Gordon Robbins Sent: Monday, April 04, 2011 8:24 AM To: Clay Barnett Cc: Michel Mitchell Subject: RE: Vitruvian Water Flow Test Clay: Saturday we tested hydrants on the east side of Vitruvian Way north of Ponte and south of Spring Valley. These hydrants are not on our map and we do not have numbers for them. Static 80 Residual 44 Pitot 30 Thanks, ~Gordo Gordon C. Robbins Deputy Fire Chief | Prevention & Administration Town of Addison | 4798 Airport Pkwy | Addison TX 75001 ofc 972.450.7220 | fax 972.450.7208 | grobbins@addisontx.gov http://www.addisontx.gov/departments/fire_dep/ From: Clay Barnett Sent: Wednesday, March 30, 2011 11:47 AM To: Gordon Robbins Cc: Michel Mitchell Subject: FW: Vitruvian Water Flow Test Howdy Gordon, Is this something that you can provide? Thanks, Clay Barnett, P.E. Town Engineer Town of Addison 16801 Westgrove Drive Addison, TX 75001-2818 Office: (972) 450-2857 From: Bruce Dunne [mailto:bdunne@icon-engineers.com] Sent: Tuesday, March 29, 2011 10:10 AM To: Clay Barnett Subject: Vitruvian Water Flow Test Good morning Clay – As you are aware, Vitruvian Building 206 (along Bella Lane) is currently under design. The MEP for this building has requested a fire flow test in order to complete his plumbing design. Could you have someone at the Town perform a flow test of the line along Vitruvian Way (preferably flow between the first two hydrants south of the intersection of Bella Lane) for pressure and flow volume. If you have any questions, just holler at me. Thanks. BRUCE F. DUNNE, P.E. President icon Consulting Engineers, Inc. Bicentennial Financial Center 250 W. Southlake Blvd., Suite 117 Southlake, Texas 76092 Phone: (817) 552-6210 Fax: (817) 552-3126 Mobile: (817) 707-9711 ****************************************************************************************************************** This e-mail and any files or attachments transmitted with it contains Information that is confidential and privileged. This document may contain Protected Health Information (PHI) or other information that is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further disclosures are prohibited without proper authorization. If you are not the intended recipient, any disclosure, copying, printing, or use of this information is strictly prohibited and possibly a violation of federal or state law and regulations. If you have received this information in error, please delete it and notify Hamid Khaleghipour at 972-450-2868 immediately. Thank you. *******************************************************************************************************************