10-4 From: Robert Farrow [mailto:rfarrow@concretepaversystems.com] Sent: Wednesday, June 01, 2011 01:40 PM To: Eric T. Little; jmassey@icon-engineers.com Cc: cbarnett@addisontx.gov ; Lauren Williams ; Mike Henjum Subject: RE: Polymer sand submittals We may have found another sand/polymer mix that works but it only comes in grey. We can discuss tomorrow. Robert Farrow Chief Operating Officer CPS Civil LLC -----Original Message----- From: Eric T. Little [mailto:ELittle@udr.com] Sent: Wednesday, June 01, 2011 2:28 PM To: Robert Farrow; 'jmassey@icon-engineers.com' Cc: 'cbarnett@addisontx.gov'; Lauren Williams; Mike Henjum Subject: Re: Polymer sand submittals Robert, That note came from comments made by Clay at last week's meeting. I'm sure he'll comment on the submittal shortly. Thanks, Eric From: Robert Farrow [mailto:rfarrow@concretepaversystems.com] Sent: Wednesday, June 01, 2011 01:23 PM To: Eric T. Little; Joel Massey Cc: Clay Barnett ; Lauren Williams ; Mike Henjum Subject: Polymer sand submittals Eric: Your meeting agenda notes indicates that the TOA is going to reject the polymer sand submittal provided by Concrete Paver Systems. The polymer sand mix that was submitted is from Techni-Seal. They have told us that they are unaware of a crushed granite sand that will conform to ASTM C144. Which we are assuming is the reason for the rejection. Is there another manufacturer of the polymer sand mix that the Town has used before? If so please provide us the manufacturers information and we will forward to Concrete Paver Systems for re-submittal. If this not the reason for rejection please let me know so we can effect a corrected submittal ASAP. Thanks Robert Farrow Chief Operating Officer CPS Civil LLC