FYI - I met with Simplex Grinnell (SG) and Robert Hale with Bredow Constructors at 3750 Belt Line in regards to the fire meter. There is an existing swing check device buried with the bypass meter in a large meter box at grade. SG is a fire line company that was requesting if the DCDA can be installed in the building. I looked at the fire closet located in the back (southside) of the building and told them it would be okay to install the assembly and mount the touch pad on the exterior wall. Robert, it may be a couple of weeks but you should be getting at least three test reports; two for the fire and one for the domestic out front along Belt Line. There is a irrigation but that would be for the management company of the shopping center. Mr. Hale said he will be submitting plans on what they will do at the existing fire meter site. The only request I have is where the existing swing check is to install a valve after it is removed. Jerry Davis, Utilities Superintendent Town of Addison 972-661-1693 jdavis@addisontx.gov P Please consider the environment before printing this email.